Notice to random visitors: This website is under construction. We will likely lunch this product in September 2009. If you have any questions, do not hesitate to contact us
Homatix - NetIO specifications - NetIO-1 Active / Bare PCB
This is technical specification for Homatix - NetIO specifications - NetIO-1 Active / Bare PCB.
System
Ethernet
Ethernet | 1 x 10/100 Mbps, RJ-45 |
Power-over-ethernet | non-802.11af 12V DC on unused pairs |
MAC Address | Locally assigned |
Protection | 1.5 KV magnetic isolation |
Protocols
Internet | TCP, UDP, IP v4 |
Web access | HTTP/1.0, CGI, XML |
Firmware upgrade | TFTP |
Network time client | SNTP |
Bare Printed Circuit Board dimensions
Analog inputs
Digital Outputs
Channels | 8, sink type, 36 VDC, 200 mA |
Magnetic Isolation | 2K Vrms or 3K VDC |
I/O Mode | DO or Pulse Output (up to 100 Hz) |
Pulse Wave Width | 10 ms/100 Hz |
Over-voltage Protection | 45 VDC |
Over-current Limit | 400 mA (typical) |
Over-temperature Shutdown | 175°C (min.) |
Output Current Rating | Max. 200 mA per channel |
Isolation | 2K Vrms or 3K VDC (Magnetic) |