Notice to random visitors: This website is under construction. We will likely lunch this product in September 2009. If you have any questions, do not hesitate to contact us

Homatix - NetIO specifications - NetIO-1 BASIC / Bare PCB

This is technical specification for Homatix - NetIO specifications - NetIO-1 BASIC / Bare PCB.

System

Ethernet

Ethernet	1 x 10/100 Mbps, RJ-45
Power-over-ethernet	non-802.11af 12V DC on unused pairs
MAC Address	Locally assigned
Protection	1.5 KV magnetic isolation

Protocols

Internet	TCP, UDP, IP v4
Web access	HTTP/1.0, CGI, XML
Firmware upgrade	TFTP
Network time client	SNTP

Bare Printed Circuit Board dimensions

Width
Height

Analog inputs

Input range	0-+15V

Digital Outputs

Channels	8, sink type, 36 VDC, 200 mA
Magnetic Isolation	2K Vrms or 3K VDC
I/O Mode	DO or Pulse Output (up to 100 Hz)
Pulse Wave Width	10 ms/100 Hz
Over-voltage Protection	45 VDC
Over-current Limit	400 mA (typical)
Over-temperature Shutdown	175°C (min.)
Output Current Rating	Max. 200 mA per channel
Isolation	2K Vrms or 3K VDC (Magnetic)